Probes and Electrodes
Cole-Parmer C527-2-1-10T Conductivity Cell; K=1.0, SS, Swage; 100 Ohm Pt RTD ATC
These 10-foot cables with stripped ends are economical replacements for a variety of controllers. There are flow-through, in-line, swage, and dip styles available.
Grainger pH Electrode Epoxy BNC/Phono Plug
The SensoRex pH Electrode pH 16Y995 is a gel-filled, combination pH electrode with a glass body and epoxy body gel filled reference. It has a 12 mm diameter pH bulb and internal Ag/AgCl reference electrode. The electrode has a BNC connector and 1 m cable. It has a 3/4" NPT thread mounting and is suitable for laboratory, industrial, and municipal water applications. The electrode has a pH range of 0-14 pH, temperature range of 0-80°C, and reference impedance of <300 MOhm.
Grainger pH Electrode Glass BNC Flat Tip 12mm Dia
The Grainger pH Electrode Glass BNC Flat Tip 12mm Dia is a pH electrode with a glass body and flat tip measuring 12mm in diameter. It has a BNC connector and measures pH in aqueous solutions from 0-14 pH. The electrode has a Ag/AgCl reference with a ceramic junction and epoxy body. It has a temperature range of 0-80°C. The electrode provides accurate pH measurements in laboratory applications.
Grainger Graphite Conductivity Sensor 0.48 Dia.
The Grainger Graphite Conductivity Sensor is a sensor used to measure the electrical conductivity in liquids. It has a 316 stainless steel body, graphite electrodes, and a 3/4" NPT process connection. The sensor has a max pressure rating of 3000 psi at 100°F and a max temperature rating of 750°F. It has a cell constant of 0.1 cm−1. The sensor can be used for applications such as boiler water level control, cooling tower conductivity control, reverse osmosis system monitoring, and water purification monitoring. It requires a compatible conductivity transmitter to provide power and convert the signal.
METTLER TOLEDO PROCESS ANALYTICAL INC SENSOR CONDUCTIVITY 316L SS
NC2075463 SENSOR CONDUCTIVITY 316L SS
Bellco Glass, Inc. OXYFERM DO Probe,12x325mm Hamilton
Dissolved oxygen DO and PH electrodes are the eyes and ears for many biotechnology process high quality sensors are required for critical measurement and Hamilton sensors are some of the fi in the world.Bellco offers Hamilton Gel-Filled pH and stainless steel polarographic dissolved oxygen sensors withthe standard 4 pin, T82, K8 and VP style connectors in 120 to 425 mm lengths.
METTLER TOLEDO DO Sensor InPro6850i/12/220
The InPro 6850i dissolved oxygen sensor with 12mm diameter body provides maximum accuracy and ultimate cleanability for large and small vessels with limited space or containers with smaller volumes.
METTLER TOLEDO pH Sensor InPro 3253i SG/225
The InPro 3253i SG/225 is a pre-pressurized, liquid filled, low maintenance pH & ORP sensor, combined with a temperature sensor, for in-line measurement in demanding applications. The 225 mm version is optimal for medium installation lengths.